Search results for: rebinder
Poured in Place Rebinder B™
Quantity: 5 gallon pail (44lbs)
Coverage: Up to 1,200 sq ft
Our Poured in Place Rebinder™ is a rubber conditioner that rejuvenates your Poured in Place rubber surface, extending its lifespan while refreshing its colors, making them pop once again.
It is a must-have maintenance solution for liability prevention. By catching granulation in its early stages, you are able to prevent further damage to your poured rubber surface, saving yourself the cost of expensive repairs while avoiding major liability concerns down the road.
Read morePoured in Place Rebinder™
Quantity: 5 gallon pail (44lbs)
Coverage: Up to 1,500 sq ft
Our Poured in Place Rebinder™ is a rubber conditioner that rejuvenates your Poured in Place rubber surface, extending its lifespan while refreshing its colors, making them pop once again.
It is a must-have maintenance solution for liability prevention. By catching granulation in its early stages, you are able to prevent further damage to your poured rubber surface, saving yourself the cost of expensive repairs while avoiding major liability concerns down the road.
Read moreRubber Surface Aromatic Binder – 1 Quart
Our Rubber Surface Aromatic Binder is a polyurethane adhesive that is the best when working with any type of rubber for playground surfacing and track and field surfacing. Our 2 pound can is perfect for any patch/ repair job.
When working with rubber surfacing, the wear layer/ EPDM should be 20% binder. Each can of rubber surfacing glue covers on average 5 sqft of space. In order to ensure the rubber adhesive works well, the rubber and binder need to be fully mixed together before use.
Allow 24 hours for binder/rubber mix to harden and dry.
In order to protect your EPDM surface from UV degradation and general wear use our Rubber Surface Rebinder.
Contractor pricing is available. Contact us for more information.
Read moreRubber Surface Base Layer Binder – 1 Gallon
Allow 24 hours for binder/rubber mix to harden and dry.
In order to protect your EPDM surface from UV degradation and general wear use our Rubber Surface Rebinder.
Contractor pricing is available. Contact us for more information.
Rubber Surface Aliphatic Binder – 5 Gallon
Our Rubber Surface Aliphatic Binder is a polyurethane adhesive that is the best when working with any type of rubber for playground surfacing and track and field surfacing. Our 5 gallon bucket is perfect for any large project.
When working with rubber surfacing, the wear layer/ EPDM should be 20% binder. Each bucket has a pour spout and a removable top for ease of use. In order to ensure the binder works well, the rubber and binder need to be fully mixed together before use.
Allow 24 hours for binder/rubber mix to harden and dry.
In order to protect your EPDM surface from UV degradation and general wear use our Rubber Surface Rebinder.
Contractor pricing is available. Contact us for more information.
Read moreRubber Surface Aliphatic Binder – 1 Gallon
Our Rubber Surface Aliphatic Binder is a polyurethane adhesive that is the best when working with any type of rubber for playground surfacing and track and field surfacing. Our 1 gallon can contains 8.39 pounds of glue and is perfect for larger patch/ repair jobs.
When working with rubber surfacing, the wear layer/ EPDM should be 20% binder. Each can of rubber surfacing glue covers on average 20 sqft of space. In order to ensure the rubber adhesive works well, the rubber and binder need to be fully mixed together before use.
Allow 24 hours for binder/rubber mix to harden and dry.
In order to protect your EPDM surface from UV degradation and general wear use Trassig’s Rubber Surface Rebinder.
Contractor pricing is available. Email info@trassig.com for more information.
Read moreRubber Surface Aliphatic Binder – 1 Quart
Our Rubber Surface Aliphatic Binder is a polyurethane adhesive that is the best when working with any type of rubber for playground surfacing, pool decking and track and field surfacing. Our 2 pound can is perfect for any patch/ repair job.
When working with rubber surfacing, the wear layer/ EPDM should be 20% binder. Each can of rubber surfacing glue covers on average 5 sqft of space. In order to ensure the rubber adhesive works well, the rubber and binder need to be fully mixed together before use.
Allow 24 hours for binder/rubber mix to harden and dry.
In order to protect your EPDM surface from UV degradation and general wear use Trassig’s Rubber Surface Rebinder.
Contractor pricing is available. Email info@trassig.com for more information.
Read moreRubber Surface Aromatic Binder – 1 Gallon
Our Rubber Surface Aromatic Binder is a polyurethane adhesive that is the best when working with any type of rubber for playground surfacing and track and field surfacing. Our 1 gallon can contains 8.39 pounds of glue and is perfect for larger patch/ repair jobs.
When working with rubber surfacing, the wear layer/ EPDM should be 20% binder. Each can of rubber surfacing glue covers on average 5 sqft of space. In order to ensure the rubber adhesive works well, the rubber and binder need to be fully mixed together before use.
Allow 24 hours for binder/rubber mix to harden and dry.
In order to protect your EPDM surface from UV degradation and general wear use Trassig’s Rubber Surface Rebinder.
Contractor pricing is available. Email info@trassig.com for more information.
Read moreRubber Surface Base Layer Binder
Our Rubber Surface Base Layer Binder is a polyurethane adhesive that is the best when working with buffings or base layer rubber for playground surfacing and track and field surfacing. Our 5 gallon bucket is perfect for any large job.
When working with rubber surfacing, the base layer/ buffings should be 12% binder. Each bucket of binder has a pour spout and removable top for ease of use. In order to ensure the binder works well, the rubber and binder need to be fully mixed together before use.
Allow 24 hours for binder/rubber mix to harden and dry.
In order to protect your EPDM surface from UV degradation and general wear use Trassig’s Rubber Surface Rebinder.
Contractor pricing is available. Email info@trassig.com for more information.
Read moreRubber Surface Aromatic Binder – 5 Gallon – 44 pounds
Our Rubber Surface Aromatic Binder is a polyurethane adhesive that is the best when working with any type of rubber for playground surfacing and track and field surfacing. Our 5 gallon bucket is perfect for any large project.
When working with rubber surfacing, the wear layer/ EPDM should be 20% binder. Each bucket has a pour spout and a removable top for ease of use. In order to ensure the binder works well, the rubber and binder need to be fully mixed together before use.
Allow 24 hours for binder/rubber mix to cure.
In order to protect your EPDM surface from UV degradation and general wear use Trassig’s Rubber Surface Rebinder.
Contractor pricing is available. Email info@trassig.com for more information.
Read more