7%

Quick Brown Wear Layer Poured in Place Repair Kit

Availability: In Stock!
$70.00 $65.00
Quick Size: Covers approximately 2.5 sqft at a depth of 1/2″ (5 lbs of rubber granules & 1 lb of Aromatic binder)

This playground rubber repair kit is an easy DIY solution that quickly solves a small problem before it turns into a big one.The patch kit is a great remedy for rubber playground surfaces that are damaged, torn, have holes or have shrunk due to freezing and thawing.

Compare

 

Instructions:

You will need: A utility knife, a bucket for mixing, a rounded trowel, soapy water and gloves

  1. Make sure you pick a dry day to patch you rubber playground surface.
  2. Using a sharp utility knife, create a clean cut around the area you would like to patch. When cutting the area, make sure to cut the edges of the area at a 45-degree angle. This will create a stronger bond at the edges of the patch.
  3. Clean the area of all loose granules and debris.
  4. Pour all of the rubber granules into the bucket and mix the entire content of the binder in a plastic pail that you plan to dispose of later.
  5. Mix the content thoroughly. Make sure that all the rubber granules are coated evenly with the binder
  6. Using a rounded trowel spread the mix onto the area you are patching.
  7. Use a mixture of water and liquid hand soap to lubricate the trowel after each pass.
  8. Secure the area and let cure for 24 to 48 hours.

Click Here for a Downloadable Instruction Sheet

Contact Us

Sales and Mailing Address:
Trassig Corp.
65 Redding Rd. Unit 874
Georgetown, CT 06829

Warehouse:
Trassig Corp.
23 Henry St.
Bethel, CT 06801

Phone: 203-659-0456
Fax: 203.549.0409
E-Mail: info@trassig.com