Jumbo Teal Wear Layer Patch Kit
Availability: In Stock!
Jumbo Size: Covers approximately 10 sqft at a depth of 1/2″ (20 lbs of EPDM rubber granules & 4 lbs of Aromatic binder)
This playground rubber repair kit is an easy DIY solution that quickly solves a small problem before it turns into a big one.
The patch kit is a great remedy for rubber playground surfaces that are damaged, torn, have holes or have shrunk due to freezing and thawing.
You will need: A utility knife, a bucket for mixing, a rounded trowel, soapy water and gloves
- Make sure you pick a dry day to patch you rubber playground surface.
- Using a sharp utility knife, create a clean cut around the area you would like to patch. When cutting the area, make sure to cut the edges of the area at a 45-degree angle. This will create a stronger bond at the edges of the patch.
- Clean the area of all loose granules and debris.
- Pour all of the rubber granules into the bucket and mix the entire content of the binder in a plastic pail that you plan to dispose of later.
- Mix the content thoroughly. Make sure that all the rubber granules are coated evenly with the binder
- Using a rounded trowel spread the mix onto the area you are patching.
- Use a mixture of water and liquid hand soap to lubricate the trowel after each pass.
- Secure the area and let cure for 24 to 48 hours.